How To Maximize the Potential of Your Joints in Ground Fighting

Your initial response is the key to success in ground fighting. Your first move sets the tone of the fight. It affects what techniques follow and eventually who dominates. Many of the Junsado responses to being pinned or immobilized on the ground rely on your initial movement as a defender.

blog5 (01)For example, when you make your body smaller or draw your limbs into your center, you not only control your body better and conserve energy, but also make yourself less vulnerable by reducing the number of exposed vital targets. As a defender, particularly on the ground, it is critical to draw your knee and elbow closer together toward the center of your body to protect yourself, collect your inner force, and strike powerfully when needed. Bending the large joints and drawing the limbs in toward the center of the body creates three potential advantages: control, range of motion and twisting force.

Control

On the ground, keeping your arms bent and close to your body increases your control and reduces the opportunities for your opponent to control you. For example, if you keep your arm straight, your opponent will likely try to lock it or break it (1). When you keep your arms bent, with your elbows close to your body, you not only defend against an arm lock, you put yourself in a strong position for twisting, pulling, pushing, or resisting (2). From this position, you can put your entire body weight into your techniques by using your legs and torso to initiate and follow through without losing control of your body as well as the situation (3).

blog5

Range of Motion

The greater the range of the motion in an arm or leg, the greater force you generate. By bending your knees or elbows, you put yourself in a good starting position for a strike, kick, push or thrusting movement. Bent joints store potential power. For example, when you are flat on your back with your legs outstretched, it is impossible to lift your body more than a few inches off the ground. But if you bend your knee, drawing your foot close to your hip and planting your foot on the ground, you are in a position to powerfully push off the ground and thrust your hip and torso upward. The same is true of your arms. By drawing your arms in close to your torso with your elbows bent, you create the possibility of striking or pushing the opponent over a greater range of motion than if your arms were already partially extended.

blog5 (8b)

 Twisting Force

When escaping from a lock, pin or hold, a twisting movement is generally easier to apply than a straight line movement. The same is true of takedowns; it is usually easier to take an opponent down by rotating your own body and whipping the opponent around it than by throwing him straight down. When a takedown utilizes a torquing action, it mitigates the resistance of the major muscles and joints of the opponent’s body and allows you to take him down with less work. In grappling against a bear hug for example, if you try to escape by going straight down or directly forward, it is nearly impossible to be successful, especially when the opponent is stronger than you are.

However, if you lower your body while twisting downward at a fifteen-degree angle, you have a better chance of escaping. By doing so, you create more sensory demands for your opponent to process, increasing his distraction and your control. More importantly, the twisting action often creates a throw or takedown in the direction of his blind spot because the twisting motion produces an angular or diagonal movement trajectory. Taken together, a twisting motion can provide you with pivotal advantages to maximize your potential while mitigating the opponent’s strength.

blog5 (0d)

 Forging Force

In wrestling against a bigger opponent or untangling a lock on a vulnerable body part, such as the neck, it is useful to use your entire body as leverage. For example, as your opponent chokes your neck with his right arm from the front, it is hard to escape using your hands alone. In this case, you can forge his arm to your body by pulling it down against your upper chest and then twist your torso to manipulate his arm. Since your torso has greater weight behind it, you can generate greater impact on the joint of his arm when you rotate your entire body.

This article is an excerpt from Junsado Fundamentals, Standing and Ground Combat.

Junsado Fundamentals, Standing and Ground Combat ($5.99, over 650 full color photos) is available exclusively in e-book format for Kindle (Amazon.com).

Using the Head-Pelvis Axis to Increase Your Power

There are five movement principles in Junsado to help you maximize the speed and power of your fighting skills. These principles also provide points of evaluation to help you assess your performance, providing critical feedback to measure the fidelity of your movement and to determine what you can eliminate. Below is the first of the five Junsado movement principles:

Head-Pelvis Axis

For fighting purposes, the body can be divided into three regions: the head/torso region, the legs and the arms. Each of the regions has both major and minor parts. The hands and feet are the minor parts of their respective regions, while the legs and arms are the major parts. The same is true of the head (minor part) and the torso (major part). Together, however, the head and torso make up the most important power source in the body.

Correct alignment of your head and pelvis is central to containing and mobilizing the force waiting to be unleashed from your body.

Correct alignment of your head and pelvis is central to containing and mobilizing the force waiting to be unleashed from your body.

Mechanically, the head and torso work together as the axis of power when we move. Imagine a line running from the center of your pelvis to the crown of your head. You can generate significant force in every technique along this axis. Your legs support the axis while transmitting force up from the ground through the upper body. Your arms and hands are the tools that deliver the force via the axis; your chin and forehead stabilize your posture.

The head-pelvis axis (HPA) runs through the center of the body (the red bar). The HPA is supported and controlled by the lower limbs (the white bars). Jointly, they augment the force of the arms and head (the black bars).

The head-pelvis axis (HPA) runs through the center of the body (the red bar). The HPA is supported and controlled by the lower limbs (the white bars). Jointly, they augment the force of the arms and head (the black bars).

In twisting, the head-pelvis axis drives the arms for striking or grappling. Rotating your entire body along the head-pelvis substantially adds more force than simply striking or pulling with your arms. When moving forward or backward, the head-pelvis axis is the root of power in both pulling and pushing. The head-pelvis axis unites the power of your legs with the weight of your entire body, allowing you to move a much heavier opponent than you could by pulling or pushing with only your arms.

The key to applying the power of the head-pelvis axis is controlling the alignment of your head and torso.

To find the correct alignment, stand in fighting stance with your chin tucked slightly down so that the crown of your head is aligned with the center of your pelvic floor. Your spine should be neither upright nor hunched. Tilt your upper body slightly forward while relaxing your shoulders, keep both knees bent, and poise your body as if you are about to take off running. This creates a dynamic stance, in which your body is ready to be unleashed.

A properly-formed head-pelvis axis enables you to better control the speed and power in your techniques, delivering maximum impact to your opponent, by helping you contain the intrinsic potential power of the torso. Proper alignment of your body, therefore, is the key to establishing your physical center, creating a balanced foundation from which to launch your techniques.

You also gain economy of motion because you can employ long- or short-range attacks without changing your stance or using additional preparatory techniques. You simply shift your weight to the back and front to attack or defend as needed, without breaking the balance and force structure of your current posture.

This natural containment of your power not only makes you stronger but also reduces telegraphing when initiating techniques. Most importantly, when you have a strong head-pelvis axis, you project an image of discipline, strength and confidence that intimidates opponents even before the fight begins.

Practical Applications of Head-Pelvis Axis

Rotating your entire body along the head-pelvis adds substantially more force than simply striking or pulling with your arms.

blog3 photo (3)

Tilt your upper body slightly forward while relaxing your shoulders, as if your body is ready to be unleashed.

blog3 photo (4)

A properly-formed head-pelvis axis enables you to better control the speed and power in your techniques, delivering maximum impact to your opponent.

blog3 photo (5)

This article is an excerpt from Junsado Fundamentals, Standing and Ground Combat.

Junsado Fundamentals, Standing and Ground Combat ($5.99, over 650 full color photos) is available exclusively in e-book format for Kindle (Amazon.com).

Strength and Power Training

This article is an excerpt from the book Ultimate Fitness through Martial Arts

Power Training for Martial Arts

Power is a combination of strength and explosiveness. It is created by releasing maximum muscular force at maximum speed. To increase power, you must increase both speed and strength. By exerting strength with speed, you take advantage of both the force generated by the muscles and the momentum created through the speed.

Power can be described in three ways:

  • Explosive power – Explosive power is the ability to exert maximum force in one or a series of dynamic acts. Example: Breaking a board with a punch.
  • Static power – Static power is the maximum force a person can exert for a short period. Example: Bench press.
  • Dynamic Power – Dynamic power is the ability to exert muscular force repeatedly or continuously over time. Example: Heavy bag workout.

 WHERE DOES IT COME FROM?

Power is derived from muscular ability. The human body contains over 400 muscles that can be broken in two classes: smooth and striated. Smooth muscles are those that perform the involuntary functions of the body like circulation and digestion. Striated muscles are those that can be voluntarily contracted, such as the muscle groups in the arms and legs. These muscles are the source of power.

power3

 Slow and fast twitch muscle fibers

Striated muscles are made up of two types of fibers: slow twitch and fast twitch. Slow twitch fibers are designed for activity that must be sustained over a long time like distance running. They have a high capacity for aerobic energy production and can remain active for a long time while producing relatively small amounts of lactic acid. This is important because lactic acid build-up in the muscle tissue causes the muscle to fatigue and eventually renders it unable to continue working. Low levels of lactic acid mean more capacity for work. People who have a high percentage of slow twitch fibers excel at endurance activities. Continue reading